The visit starts with a call. You describe what is happening, we scope the job on the phone, and the price is confirmed before anything is scheduled. When we arrive, we get to work without delay, and we test everything before we leave. That is how every job goes, whether it is a leaking supply line under the kitchen sink, a water heater that stopped producing hot water, or a main line backup that has taken out the whole house.
Kuna is a city where most homes sit on basements, the housing stock spans several decades of construction, and the winters put real pressure on pipes that were not built with cold-weather protection in mind. We handle residential and commercial plumbing work across the city and the surrounding area, from single-family homes and rental units to commercial properties with more complex demands. We are available every day from 7:30 AM to 9:00 PM.
Call (208) 694-9789 to get a quote.
Older homes in Kuna sometimes still carry galvanized steel or polybutylene supply lines. Galvanized pipe corrodes from the inside, gradually narrowing until flow drops across the whole house and fittings begin to fail. Polybutylene is prone to cracking at joints and along the pipe body, often without warning. When we see recurring leaks in different locations, or pressure that keeps dropping despite repeated repairs, a full pipe replacement is usually the more practical answer than patching one section at a time. We assess the existing system on the call and explain what replacement involves before quoting.
Pipes in exterior walls, crawl spaces, and unheated basement runs are the first to freeze when temperatures fall hard overnight across the region. A frozen pipe that thaws without splitting is a warning. One that splits can release a significant volume of water before the shutoff is reached. We locate the freeze point, thaw the line carefully, and check the full affected section for cracks before carrying out any repair. If cold weather is forecast, calling before the freeze is always the better option.
A clog in a single fixture drain is one thing. When multiple drains back up at the same time, or sewage comes up through a floor drain, the problem is further down in the main line. Root intrusion, grease accumulation, and deteriorated pipe sections are the most common causes. We trace the blockage to its source before clearing it, because the cause matters for choosing the right repair. For heavily built-up runs where a standard snake will not clear the line completely, hydro jetting is the more effective approach. It clears the walls of the pipe rather than just punching a hole through the obstruction.
A shower that runs too hot, too cold, or will not hold a consistent temperature usually points to a worn cartridge or a failing pressure-balancing valve. These repairs are straightforward when the right parts are on hand, but getting the temperature right before closing up the wall matters. We repair and replace shower valves and mixers, confirm the balance across the range of the handle, and test for leaks at the connections before the job is done.
No hot water is one of the most disruptive plumbing problems a household faces. We diagnose the cause before recommending a path forward, because a unit that can be repaired should not be replaced. When replacement is the right call, we size the new unit to the property, handle the full installation, and run it through a complete cycle before we leave. Tank and tankless units are both part of our regular work, and commercial water heater replacement for larger properties is handled the same way.
For busy homeowners and property managers, a repair that comes back is more than an inconvenience. It raises a fair question: was the original diagnosis right, and was the right repair done. We take second-opinion calls and we take over work that someone else started. When a leak returns or a drain backs up again shortly after a repair, we go back to the source rather than repeating the same fix.
We get to the bottom of the problem fast. That sometimes means pressure testing a line to find a leak that was not visible the first time, or running a camera inspection on a drain that keeps blocking to see what the snake did not clear. When we find that a previous repair was done to a lower standard, we explain what needs to be corrected and why before quoting the work. Drain and pipe work is carried out to code, and that applies to corrections as much as it does to new installations.
Taking over a job mid-stream is also something we handle. If a repair is partially complete and the contractor is no longer available, call and describe where it stands. We scope what remains on the phone and confirm a price before scheduling the visit.
We are available every day from 7:30 AM to 9:00 PM, and we work with your calendar to find a time that fits. For planned repairs, scheduling ahead is the most straightforward approach. For rental properties and commercial spaces that need to stay operational, we discuss access and timing on the call so the visit causes as little disruption as possible.
When the problem will not keep, we take urgent calls during our operating hours and work to get to the property as quickly as the schedule allows. A burst pipe, a major active leak, a complete loss of hot water, or a sewer backup coming up through the floor are all situations that warrant an immediate call. Leak found. Leak fixed. Water back on.
The person who answers the phone can tell you what the repair involves. That means you are not left guessing whether the problem is urgent or whether it can wait until a more convenient time. Describe what you are seeing and you will get a straight answer about what the job is likely to require. If none of that quite fits, the page covering our plumbing services covers the wider range.
A drop in water pressure across the whole house usually points to one of a few causes: a supply line that has narrowed from mineral buildup or corrosion, a partially closed shutoff valve, or a failing pressure regulator. Homes with older galvanized pipe are particularly prone to the first of these, because the corrosion builds up gradually and the pressure loss is slow enough that it can go unnoticed for a long time. We trace the pressure drop to its source before recommending any repair, because the fix depends entirely on the cause.
When pressure is fine at one fixture but poor at another, the problem is usually in the branch line serving that part of the house rather than in the main supply. A partially blocked line, a failed valve, or a section of pipe that has corroded more heavily than the rest can all produce this pattern. We check the full run from the main supply to the affected fixture and identify where the restriction is before opening anything up.
Backflow prevention is a related concern for properties with irrigation connections or older plumbing configurations. We check that backflow prevention is in place and functioning correctly when it is part of the job scope, because a failed backflow preventer can allow contaminated water to enter the supply line.
The price is confirmed on the phone before anything is scheduled. What the job involves, where the fault is located, and what has to come apart to reach it are the things that move a quote. A straightforward drain cleaning is priced differently from a main line repair that requires excavation. A water heater swap in an accessible utility room is a different scope from one in a tight crawl space with an older gas connection.
If the work uncovers something that changes the scope, we discuss it before proceeding. Nothing is added to the job without a conversation first. Pricing agreed up front. Code-compliant work. Reliable water.
To get a number that reflects your actual situation rather than a general range, the fastest path is a call. Describe what is happening, where it is, and how long it has been going on. We will tell you what the job is likely to involve and confirm the price before we schedule the visit.
Call (208) 694-9789 to get started.
Properties on a municipal water supply in this area receive treated water, but the mineral content still varies enough to affect fixtures, water heaters, and supply lines over time. Scale buildup inside a tank water heater reduces efficiency and shortens the life of the unit. The same buildup inside supply lines gradually restricts flow. We address both when they are part of a repair visit, and we explain what we find rather than recommending work that is not warranted.
Properties on a private well operate differently. The supply is not pre-treated, so mineral content, sediment, and pressure fluctuations are all managed at the property level. A well pressure tank that is waterlogged or failing will produce short-cycling at the pump and inconsistent pressure throughout the house. We handle the plumbing side of private-supply systems, including pressure tank assessment, supply line repair, and fixture work, and we can tell you on the call whether what you are describing falls within our scope.
Water quality concerns that go beyond the supply line, such as filtration and softening, are worth raising on the call. We handle point-of-use and whole-house filter installations and can discuss what a property with harder water or a private supply typically needs.
We cover Kuna and the surrounding communities across Ada County. That includes Meridian, Nampa, Boise City, Garden City, and Eagle. Whether the call comes from a homeowner in Kuna or a property manager with units spread across the county, the process is the same: a price confirmed on the phone, a scheduled visit, and the work done right.
If you are not sure whether your address falls within our current service area, call and ask. We will confirm it on the phone and get you on the schedule if we can reach you.
That is a reasonable thing to do for a job of that size. A repipe is a significant investment, and understanding what is driving the recommendation, whether it is pipe material, repeated failures, or water quality changes across the house, helps you make a confident decision. When you call us for an assessment, we explain what we find and what the alternatives are so you have the information you need.
Yes. Before we leave, we walk through what was repaired or installed and test the system so you can see it working correctly. If there is anything you want to ask about what was found or how the repair was carried out, that is the right time to ask.
If we open a wall or access a system and find something that changes what the repair involves, we stop and discuss it with you before proceeding. Nothing is added to the job without a conversation first. The original quote covers what we agreed on the call, and any additional scope is explained and priced separately before we continue.
Call (208) 694-9789 and stay on the line.
If there is any uncertainty about the address, the best approach is to describe the property clearly when you book, including the street number, any nearby landmarks, and whether the entrance is off a side street or alley. Confirming the address on the call prevents a delay on arrival.
It can. Crawl spaces affect how supply lines and drain lines are routed and accessed, and the condition of the space matters for how the work is carried out. When you call, mention that the property has a crawl space so we can factor that into the scope and the quote.
Call us and describe what you are seeing. A drain that slows down again quickly after being cleared usually points to a problem further down the line, a partial blockage that was not fully resolved, or a recurring source such as grease buildup or root intrusion. We would rather come back and get to the bottom of it than have you deal with the same problem on a loop.
The details of what was done are covered at the end of the visit. If you need a record of the work for a landlord, a property manager, or your own files, let us know when you call and we can discuss what documentation is available.
Yes. When you book service for a rental property, let us know the arrangement and we can discuss how to handle calls from the tenant directly.
The process works the same way: a call to (208) 694-9789, a description of what is happening, and a price confirmed before anything is scheduled.
If you have a planned repair, a pipe winterization to get done before the first hard freeze, or a sump pump that has not been tested since last spring, the time to call is before the problem forces your hand. We pick up the phone. We book the visit. We test before we leave.
Call Eagle Plumbing Company at (208) 694-9789 every day from 7:30 AM to 9:00 PM.
The price is confirmed before anything is scheduled, and we are taking new calls across Kuna and Ada County now.
We reach these towns too: Nampa, Star, Caldwell. You can browse our local coverage area.
From a backed-up drain to a burst pipe in January, we handle the full range of residential and commercial plumbing work across Kuna and Ada County, seven days a week from 7:30 AM to 9:00 PM. The table below covers what each service includes, who it fits best, and one practical note worth knowing before you call. Every job starts the same way: a price confirmed on the phone before anything is scheduled.
| Type of Job | What the Job Covers | Recommended For | Good to Know |
|---|---|---|---|
| Pipe Insulation & Winterization | Insulation of exposed crawl space and garage lines, Exterior wall supply line protection, Seasonal winterization for vacant properties, Freeze risk assessment by location | Homeowners preparing for winter or managing a property that sits empty in cold months | Getting exposed lines insulated before temperatures drop is the most straightforward way to avoid a burst pipe call in January. |
| Water Heater Repair & ReplacementMost Popular | Tank and tankless unit service, Diagnosis before any replacement is recommended, Sizing for residential and commercial demand, Connection and pressure relief valve check | Households or businesses with no hot water, inconsistent heat, or an aging unit | We find the cause before recommending a replacement. A unit that is repairable gets repaired. |
| Sewer & Main Line Service | Main line clog clearing, Damaged section repair, Full sewer line replacement, Line work from the house to the city connection | Homes with slow drains throughout the house or a confirmed sewer backup | We work the line itself, from the house out to the city tap. Tank and drain-field work falls outside what we do. |
Call (208) 694-9789 to get a price on your specific job and find out how quickly we can get to you.
(208) 694-9789