Eagle Plumbing Company handles residential and commercial plumbing repair and installation across Eagle, Idaho, seven days a week from 7:30 AM to 9:00 PM. Whether you own a home, manage a rental property, or run a business, we are ready to take your call and get the work scheduled. From a clogged drain to an emergency burst pipe, we scope the job on the call and confirm the price before anything starts. We pick up the phone. We book the visit. We test before we leave.
Whether this is your first plumbing repair or your tenth, the process starts the same way: a call, a clear explanation of what the job involves, and a price confirmed before we schedule. We work with homeowners, renters, landlords, property managers, and commercial clients across Eagle and Ada County. That includes single-family homes, apartment buildings, rental units, and office buildings.
Working here means getting your plumbing right the first visit. We know the housing stock in this area, the pipe configurations common in local construction, and what kinds of calls come up most often by season. Clear communication from the first call to the final test is how we keep every job on track, whether it is a straightforward faucet swap or a full repiping project.
For busy homeowners and property managers, it helps to know one contractor can handle the full range of residential and commercial plumbing work. Below is a breakdown of the services we handle most often in Eagle and the surrounding communities.
Kitchen grease buildup, bathroom hair clogs, slow shower drains, and full blockages in the main line are all jobs we handle regularly. We clear the obstruction and check the line so the problem does not come back in a week. When a sewer backup is involved, we trace the clog to its source before clearing it. We get to the bottom of the problem fast.
A drip behind the wall or a wet spot under a cabinet can point to a supply line, a fitting, or a joint that has started to fail. We use pressure testing and electronic detection methods to locate the source without tearing into walls unnecessarily. Once the leak is found, we repair or replace the damaged section and test the line before we leave. One call gets the leak looked at.
No hot water is one of the most disruptive plumbing problems a household or business can face. We service both tank and tankless water heaters, handle repair calls when the unit can be salvaged, and replace units when repair no longer makes sense. For commercial properties with higher demand, we size and install units that match the load. The cause is found before anything is replaced.
A running toilet, a dripping faucet, or a fixture that will not shut off completely wastes water and adds up on the bill. We repair and replace toilets, install new faucets, and handle full fixture swaps in kitchens, bathrooms, and utility spaces. Outdoor faucet and hose bib work is also part of our regular service, including frost-free hose bib installation for homes that need it.
A sewer backup or a slow-draining main line is not something to put off. We clear main line clogs, repair damaged sewer line sections, and replace lines that have deteriorated past the point of patching. Our work covers the line from the house out to the city connection. We stay on the line itself and do not cross into tank or drain-field territory.
Garbage disposal installations and repairs, shutoff valve replacements, and low water pressure diagnostics are all jobs we handle on a regular basis. These are the smaller calls that still need to be done right. A shutoff valve that does not close fully is a problem waiting to happen, and low water pressure often points to a supply line issue worth investigating. We keep your home dry and your water flowing.
When a home has repeated leaks in multiple locations, or the pipe material has reached the end of its useful life, repiping the whole house is often the more practical path. We assess what is in place, explain what replacement involves, and give you a price on the call. Repiping eliminates the cycle of patching one section only to have another fail shortly after.
Eagle sits at an elevation where winter temperatures regularly drop well below freezing, and the freeze-thaw cycles that come with Ada County winters create specific plumbing demands that warmer climates simply do not see. Snowmelt in late winter and early spring raises groundwater in basements. Exposed supply lines in crawl spaces, garages, and exterior walls are vulnerable when temperatures fall hard and fast. The three services below address what comes up most often here when the season turns.
We treat your home and its pipes the way we would our own, which means explaining what is happening, what the repair involves, and what you can do to reduce the risk next season.
When temperatures drop sharply in Eagle, pipes in exterior walls and uninsulated crawl spaces are the first to freeze. A frozen pipe that is not caught quickly can split, and a split pipe can release a significant volume of water before the shutoff is reached. When we respond to a frozen or burst pipe call, we locate the freeze point, thaw the line safely, test for cracks along the affected section, and repair or replace what the freeze damaged. This is one of the most time-sensitive calls we handle, and we take it seriously.
Spring snowmelt in Ada County pushes groundwater up, and homes with basements need a working sump pump to keep that water from finding its way inside. We install new sump pumps, replace units that have failed, and handle repair calls when a pump is running but not keeping up. If your basement has flooded before or you are not sure whether the current pump is up to the job, a call is the right first step.
The most straightforward way to avoid a burst pipe call in January is to get exposed supply lines insulated before the cold sets in. We insulate lines in crawl spaces, garages, and exterior wall runs, and we walk through the property to identify spots that are most at risk. Seasonal winterization is also worth scheduling for vacation homes, rental properties, or any building that sits empty through the colder months.
Hearing a running toilet or a drip behind the wall is one thing. A burst pipe, a major leak, a complete loss of hot water, or a sewer backup coming up through the floor is another situation entirely. We take urgent calls during our operating hours, seven days a week from 7:30 AM to 9:00 PM, and we work to get to you as quickly as the schedule allows.
Leak found. Leak fixed. Water back on.
When you call with an emergency, you get honest recommendations on repairs, never an upsell. If the fix is a straightforward repair, that is what we quote. If the situation calls for a replacement, we explain why before we proceed.
When the job is done, we leave your home clean and dry, but the conversation starts well before we arrive. When you call for a quote, you get a rate on the phone based on what the job involves. The price is confirmed before anything is scheduled, and you know what it covers before we show up.
Pricing agreed up front. Code-compliant work. Reliable water.
Costs vary depending on the scope: a water heater replacement involves different materials and time than a drain cleaning or a toilet installation. Calling is the fastest way to get a number that actually reflects your situation rather than a generic range. Drain and pipe work is carried out to code, and the quote reflects what the job actually requires.
We handle plumbing repair and installation across Eagle and into the broader Ada County area. That includes Boise, Meridian, Star, Garden City, Kuna, and Middleton. Whether the call comes from a homeowner in Eagle proper or a property manager with a unit in a nearby community, we treat the job the same way: a price on the call, a scheduled visit, and the work done right.
If you are searching for a plumbing contractor near you in Ada County, give us a call and we will confirm whether your address falls within our service area.
Common signs include inconsistent hot water, a rumbling or popping sound from the tank, discolored water at the hot faucet, or visible corrosion around the connections. A water heater that is running but not keeping up with normal demand may have sediment buildup, a failing heating element, or a thermostat issue. We diagnose the cause before recommending repair or replacement, so you are not replacing a unit that could be salvaged.
A burst pipe, a major active leak you cannot stop, a sewer backup affecting the whole house, or a complete loss of hot water are all situations that warrant an immediate call. These problems cause damage quickly and tend to get worse the longer they sit. We take urgent calls every day from 7:30 AM to 9:00 PM and work to get to you as quickly as the schedule allows.
If water is actively leaking, shut off the main water supply to the house. The main shutoff is typically near where the water line enters the home, often in the basement, utility room, or near the water meter. Do not attempt to open walls or access pipes yourself. Keep the area clear and note where the water is coming from so you can describe it accurately when we arrive.
Low pressure in older homes is often caused by mineral deposits narrowing the inside diameter of supply lines over time, a partially closed shutoff valve, or corroded galvanized steel pipe that has rusted from the inside out. Ada County's water supply carries moderate mineral content, which accelerates buildup in older systems. We trace the pressure drop to its source before recommending a repair.
Galvanized steel pipe corrodes from the inside, gradually restricting flow and eventually failing at fittings and joints. Polybutylene pipe, which was common in homes built between the late 1970s and mid-1990s, is prone to cracking at connections and along the pipe body over time. If your home has either material and you are seeing recurring leaks or pressure problems, a repiping assessment is worth scheduling.
A targeted repair addresses a single failed section or fitting and makes sense when the rest of the system is in reasonable condition. A full repipe replaces the supply lines throughout the house and is the more practical answer when multiple sections are failing, the pipe material has reached the end of its useful life, or repairs are coming up repeatedly in different locations. We assess what is in place and explain which approach fits the situation before quoting either option.
We start by identifying the type and location of the blockage, because grease buildup, hair, and debris each respond to different clearing methods. For a simple clog, we clear the line and flush it to confirm it is moving freely. For a main line backup or a drain that has clogged repeatedly, we may run a camera inspection to identify what is causing the problem before clearing it.
A sulfur or sewage smell coming from a drain often points to a dry P-trap, which allows sewer gas to pass through. A persistent odor that is not resolved by running water in a seldom-used drain may indicate a cracked pipe, a venting problem, or a partial blockage that is trapping organic material. We trace the source of the odor before recommending a repair.
When we open up a wall or access a system that has outdated or non-compliant work, we explain what we find before proceeding. If a correction is required to bring the affected section up to current code, we discuss the scope and the cost before any additional work is done. We do not proceed with changes beyond the original scope without your approval.
The quote is based on what the job appears to involve at the time of the call. If the work uncovers a complication, such as a corroded fitting that needs replacement, a pipe run that is longer than expected, or a code correction on an older system, we discuss the additional scope before proceeding. Nothing is added to the job without a conversation first.
Clear out the cabinet under the sink, the area around the water heater, and the space near any cleanout or shutoff valve that may be involved in the repair. If the work involves a bathroom fixture, removing items stored around the toilet or vanity speeds up the visit. The more direct the access, the faster the job goes.
Yes. The work area may involve open valves, standing water, tools on the floor, and sections of exposed pipe. Keeping kids and pets in a separate part of the home during the visit is the safest approach for everyone. We will let you know when the area is clear and the work is complete.
Testing varies by job type. Supply line repairs and replacements are tested under normal water pressure with the line running. Drain work is flushed to confirm flow and checked for backup. Water heater installations are run through a full cycle and checked at the connections and the pressure relief valve. We do not leave until the system is working correctly.
A sump pump installation involves setting the unit in the pit, running the discharge line clear of the foundation, and testing the float and switch to confirm the pump activates at the right water level. A pump that runs constantly, cycles on and off rapidly, or fails to activate when the pit fills is not keeping up. If your basement has taken on water or you have not tested the pump recently, a call before the spring snowmelt season is the right time to address it.
Eagle Plumbing Company is available seven days a week from 7:30 AM to 9:00 PM for residential and commercial plumbing calls across Eagle, Idaho, and the surrounding area. Whether you need a drain cleared, a water heater replaced, a burst pipe repaired, or a full repiping estimate, the call is where it starts.
Call (208) 694-9789 to get a price on the job.
We pick up the phone. We book the visit. We test before we leave.
From a backed-up drain to a burst pipe in January, we handle the full range of residential and commercial plumbing work across Eagle and Ada County, seven days a week from 7:30 AM to 9:00 PM. The table below covers what each service includes, who it fits best, and one practical note worth knowing before you call. Every job starts the same way: a price confirmed on the phone before anything is scheduled.
| Type of Job | What the Job Covers | Recommended For | Good to Know |
|---|---|---|---|
| Faucet & Fixture Installation | Kitchen and bathroom faucet replacement, Fixture swaps in utility and laundry spaces, Shutoff supply line replacement, Outdoor hose bib service | Remodels, fixture upgrades, or a dripping faucet that will not stop | New fixture installation is also a good time to replace the supply stops underneath, especially in older homes where those valves have not moved in years. |
| Pipe Insulation & Winterization | Insulation of exposed crawl space and garage lines, Exterior wall supply line protection, Seasonal winterization for vacant properties, Freeze risk assessment by location | Homeowners preparing for winter or managing a property that sits empty in cold months | Getting exposed lines insulated before temperatures drop is the most straightforward way to avoid a burst pipe call in January. |
| Water Pressure & Shutoff Valve Repair | Low pressure diagnosis, Pressure regulator adjustment or replacement, Shutoff valve repair and replacement, Supply line inspection | Homes with noticeably weak pressure or a shutoff valve that no longer closes fully | A shutoff valve that does not close all the way is a problem waiting to surface. Replacing it before an emergency is straightforward work. |
| Toilet Repair & Installation | Running toilet diagnosis and repair, Full toilet replacement, Wax ring and flange work, Flush valve and fill valve service | Homeowners dealing with a constantly running toilet, a weak flush, or a full fixture swap | A running toilet can waste a significant volume of water before it is noticed on the bill. The fix is usually straightforward once the cause is found. |
| Water Heater Repair & ReplacementMost Popular | Tank and tankless unit service, Diagnosis before any replacement is recommended, Sizing for residential and commercial demand, Connection and pressure relief valve check | Households or businesses with no hot water, inconsistent heat, or an aging unit | We find the cause before recommending a replacement. A unit that is repairable gets repaired. |
| Drain Cleaning & Clog Removal | Kitchen grease and food buildup, Bathroom hair and soap clogs, Main line blockages, Slow or fully stopped drains | Homeowners and property managers with recurring or sudden drain backups | A drain that clogs repeatedly in the same spot often points to a deeper issue in the line worth investigating before the next backup. |
| Emergency Plumbing | Burst pipe response, Major active leak control, Sewer backup affecting the whole house, Sudden loss of hot water | Any situation causing active water damage or a complete loss of service | We take urgent calls every day from 7:30 AM to 9:00 PM and work to get to you as quickly as the schedule allows. |
| Leak Detection & Repair | Pressure testing to locate hidden leaks, Electronic detection without unnecessary wall cuts, Supply line and fitting repair, Post-repair pressure check | Anyone with a wet spot, high water bill, or drip they cannot locate | Catching a slow leak early typically means a simpler repair. Left alone, water behind a wall can affect framing and subflooring. |
| Frost-Free Hose Bib Installation | Replacement of standard exterior faucets, Frost-free bib installation in freeze-prone locations, Supply line and valve connection, Post-install flow test | Eagle homes with exterior faucets that have frozen or burst in past winters | Frost-free hose bibs are designed to keep the water column inside the heated envelope of the home, which is the right answer for Ada County winters. |
| Sewer & Main Line Service | Main line clog clearing, Damaged section repair, Full sewer line replacement, Line work from the house to the city connection | Homes with slow drains throughout the house or a confirmed sewer backup | We work the line itself, from the house out to the city tap. Tank and drain-field work falls outside what we do. |
| Garbage Disposal Service | Disposal installation, Jam clearing and reset, Worn or failed unit replacement, Drain connection check | Kitchens with a failing, noisy, or non-functioning disposal | A disposal that hums but does not spin is often jammed rather than failed. We check before recommending a replacement. |
What is the difference between a tank water heater and a tankless unit, and how do I choose?
A tank water heater stores a set volume of hot water and reheats it continuously. A tankless unit heats water on demand and does not maintain a standing supply. Tank units tend to cost less upfront and are simpler to service. Tankless units take up less space and do not run out of hot water during high-demand periods, which makes them a practical fit for larger households or commercial applications. We walk through both options on the call so you can make the choice that fits your usage and your budget.
How do I know if a clog is in the fixture drain or further down in the main line?
A clog that affects only one fixture, such as a single slow sink or a single backed-up shower, is usually in the branch drain for that fixture. When multiple drains in the house are slow at the same time, or when water backs up in one fixture while you run another, the blockage is more likely in the main line. We trace the problem to its source before clearing it, because the right clearing method depends on where the clog actually is.
What can hydro jetting clear that a standard drain snake cannot?
A snake breaks up or pulls out a blockage, which handles most household clogs well. Hydro jetting uses pressurized water to cut through grease buildup, flush out debris, and scour the pipe wall, which is more thorough for lines with heavy accumulation or recurring grease problems. For a drain that clogs repeatedly despite regular snaking, jetting addresses the root cause rather than just the immediate symptom.
Cause Found Before Anything Is Replaced
We diagnose before we quote a replacement. If a repair is the right answer, that is what we recommend.
How do tree roots get into a sewer line, and what does the repair involve?
Tree roots follow moisture, and a small crack or a deteriorating joint in a sewer line is enough of an opening. Once inside, roots grow quickly and can fill the line or break the pipe wall further. The repair depends on what the inspection shows. A section with root intrusion and intact pipe walls can sometimes be cleared and lined. A section that has collapsed or cracked significantly typically requires excavation and replacement of that run.
What are the signs that a sewer or main line has a problem beyond a simple clog?
Gurgling sounds from multiple drains, sewage odors in the yard, soft or unusually green patches of grass above the sewer line run, and water backing up in the lowest fixtures in the house are all signs the issue goes beyond a typical clog. These symptoms can point to a break, a root intrusion, or a section of pipe that has shifted or settled. We trace the source before recommending a repair so the scope is clear before any work begins.
How do frozen or burst pipe repairs work, and what should I do immediately?
If you suspect a frozen pipe, shut off the main water supply before the pipe thaws. A frozen pipe that has cracked will release water as soon as it warms. When we arrive, we locate the freeze point, thaw the line carefully, and inspect the affected section for cracks or splits before repairing or replacing what the freeze damaged. Do not use an open flame to thaw a pipe. Shut off the water, call us, and keep the area clear until we arrive.
Code-Compliant Work on Every Job
Drain and pipe work is carried out to the code inspectors in Ada County enforce, and the quote reflects what the job actually requires.
How do I know when a DIY repair is reasonable and when to call a plumber?
Replacing a showerhead, a toilet flapper, or an aerator on a faucet are repairs most homeowners can handle with basic tools. Anything involving the supply lines behind the wall, the main shutoff, a water heater, or the sewer line is worth a call. The risk with a DIY repair on a pressurized supply line or a drain connection is that a small mistake can cause a leak that is not immediately visible. We scope the job on the call and give you a straight answer on what the work involves.
How long does a full house repipe typically take?
The timeline depends on the size of the home, the pipe material being replaced, and how the walls and ceilings are configured. Most single-family repiping jobs run one to three days for the pipe work itself, with access points that need patching afterward handled separately. We walk through what the job involves on the call and give you a realistic picture of the timeline before anything is scheduled.
Scope Agreed Before Any Pipe Is Cut
The price is confirmed on the call and the scope is clear before we schedule. Nothing is added to the job without a conversation first.
What causes a faucet or fixture to drip even after the handle is fully closed?
A dripping faucet after the handle is closed usually points to a worn washer, a deteriorated O-ring, or a failed cartridge inside the valve body. The fix depends on the faucet type. Ball faucets, cartridge faucets, and compression faucets each have different internal components, and the repair is different for each. We identify the type and the cause before recommending a repair or a full fixture replacement.
What is the right time of year to schedule pipe insulation or winterization in Eagle?
The practical window is late September through October, before the first hard freeze of the season. Ada County can see temperatures drop sharply and quickly once November arrives, and a crawl space or garage line that was fine last year may not be adequately protected if the setup has not been checked recently. Vacation homes and rental properties that will sit empty through winter are worth scheduling before the owner or manager leaves for the season.
How does a water pressure regulator work, and when does it need to be replaced?
A pressure regulator sits on the main supply line where it enters the home and reduces the incoming municipal pressure to a level that is safe for the home's pipes and fixtures. When the regulator starts to fail, pressure can creep up or drop unpredictably. Signs include pressure that varies throughout the day, banging pipes when a faucet is shut off quickly, or pressure that has changed noticeably without any other explanation. We test the regulator and the supply line before recommending a replacement.
Call (208) 694-9789 to get a price on your specific job and find out how quickly we can get to you.
(208) 694-9789